Valve unit VU EP-1 (regulator fully open)

Variants

Valve unit with electro-pneumatic valves that can be used to control PIAB’s vacuum conveyors with external PLC or similar electrical control system.
Simple installation: Prepared for connection to the vacuum conveyor’s main functions; start the pump, close the bottom valve, open the bottom valve, fluidization and the filter shock.
Prepared to be fitted with six electro-pneumatic valves. The unit is delivered with four valves and two unused spare positions.
The valve unit has an electrical connection with an 8-pin M12x1 connector.
The unit is delivered with a connection cable (L=6 ft) that is fitted with a connector in one end.
Valve unit 0112864 has a pre-set regulator value (2.5 bar) to meet requirement for older bottom valves (product code C, CB, F, 6 and 8)